Why do my switches not work in The Grid 1

Check your switch connections:

1. Check that the primary switch is connected to socket 1 (try the others to be sure!).
2. Check that all the connections between the switch and the PC are firmly in place.

Check that you are in switch mode:

1. Right-click on any cell.
2. Make sure that Input Device > Switch is ticked on the menu.

Check that you have the right connection specified:

1. Choose Input Device > Switch Settings from the menu.
2. Click on 'Configure Switches'
3. Choose the appropriate input: serial, joystick or keyboard.

Check the test lights:

1. The numbered squares at the bottom of the Switch Configuration window will light up when the switches are pressed.
2. If the squares do not light up then check that you have the right port selected for serial or joystick switches, or the correct keys allocated for keyboard switches. If the correct port is selected then check your cable connections and try another switch if one is available.
3. If the squares do light up then The Grid is recognising your switches. If the switches still do not work then check that your switch settings are correct (see the manual for how to configure these) .